Festool 489571 – FSZ 300 Fastening Clamp
$96.00
Best for: Clamping guide rails, MFT/3 tables and workpieces up to 300 mm thick.
Why this one: The larger clamp; pick the FSZ 120 pair for thinner work.
300 mm (11-13/16″) capacity | FS rails, MFT/3, CMS
2 in stock (can be backordered)
Description
Festool 489571 FSZ 300 Fastening Clamp, 2 Pieces
The Festool 489571 is the FSZ 300 fastening clamp, sold as 2 pieces. It is a solid steel screw clamp shaped to fit the clamp groove on Festool guide rails, the MFT multifunction table and Festool machines, with a 300 mm (11-13/16 inch) clamping width for thick or stacked workpieces.
Features and Specifications
- Clamping width: 300 mm (11-13/16 inch)
- Body: solid steel for a firm hold
- Handle: ergonomically shaped wooden handle
- Pad: soft protective cap for non-slip, gentle clamping
- Fits: FS/2, FS/2-KP and FSK guide rails, and the MFT
- Pack: 2 pieces
Where It Fits
Slide the clamp head into the groove under the guide rail or cross-cutting rail and tighten it against the workpiece, so the rail cannot move during the cut. On an MFT/3 or in a mobile workshop, the same clamps hold workpieces down for routing, drilling and sanding. They also fasten sections on semi-stationary saws such as the CS 50/70 and KS/KSC 60.
Who Uses It
Cabinet makers, finish carpenters and installers use the Festool 489571 for angled rail cuts, narrow parts and any cut where the rail grip strips alone are not enough. Its deeper reach handles thick stock and stacked parts that a shorter clamp cannot span.
Use and Care
Tighten only as much as needed to stop movement; overtightening can mark soft wood and flex thin panels. Keep the threads free of dust and glue, and check the protective caps from time to time. Replace a worn cap so the clamp does not mark finished surfaces, and store the clamps where they will not be dropped or bent.
Related Products
- Festool tools and accessories at IBEX
- Guide rails and accessories
- Festool 489570 FSZ 120 fastening clamp, 2 pieces
- Festool 769941 FSK 250 cross-cutting guide rail
Order the Festool 489571 from IBEX
IBEX stocks this item in Calgary and ships from Calgary. For larger quantities, call or email for a quote.
Additional information
| Weight | 2.00 lbs |
|---|---|
| Dimensions | 16.50 × 5.50 × 1.50 in |
| Brand | Festool |
| Product Type | Fastening Clamp |
| Model | FSZ 300 |
| Part Number | 489571 |
| GTIN (EAN) | 4014549105054 |
| Clamping Capacity | 300 mm (11-13/16 in) |
| Material | Steel |
| Compatible Tools | FS guide rails, MFT/3, CMS |
| Packaging | Set of two (2-pack) |
| Condition | New |
You may also like…
Related products
-

Festool 202460 – ST-STF D150/MJ2-M8-H-HT FUSION-TEC Hard Sanding Pad, 6", M8 Thread
6" hard FUSION-TEC pad, M8 | ETS 150, LEX 1500 out of 5$86.00 Add to cart -

Festool 498689 DOMINO Beech Tenon Stock D 14x750/18 BU
Beech 14 mm x 750 mm stock | cut your own lengths0 out of 5$129.00 Add to cart -

Festool 202461 – ST-STF D150/MJ2-FX-W-HT FUSION-TEC Soft Sanding Pad, 6", FastFix Connection
6" soft FUSION-TEC pad, FastFix | RO 1500 out of 5$86.00 Add to cart -

Festool 491498 – FS 1400/2 55" Guide Rail, Aluminum, Integrated Splinterguard
55" (1400 mm) guide rail | integrated splinterguard0 out of 5$209.00 Add to cart






Reviews
There are no reviews yet.