Festool tools in Calgary · Festool-compatible Sia consumables · shipped across Canada
Festool sanders are the most precise tools in the trade — and they only work right with the right consumables. IBEX Enterprises stocks Festool tools — sanders, CLEANTEC dust extractors and Domino joinery — plus the Festool-compatible Sia Siaspeed 1950 disc line in a full grit range. If you run a Festool ETS, RO, or ETS EC, this is your one-stop catalog for Festool tools and the consumables that fit them.
Looking for a specific Festool part? Submit an inquiry or call 403-250-3399.
On this page
Why Festool tools buyers shop with us
The 49-hole pattern is engineered, not approximated. The Sia Siaspeed 1950 line is the Festool-compatible disc family we stock, and it’s there because the hole alignment matches Festool’s CT-series dust extractors precisely — you keep full suction performance through the disc’s life. Cheaper “Festool-pattern” discs from no-name brands lose 30–40% of suction within an hour because the holes don’t align with the backing pad’s vacuum channels.
Full grit range, always in stock. From 40 grit (initial stock removal) to 1500 grit (between-coat finishing on automotive clearcoat), we stock the full Siaspeed 1950 grit ladder.
Western Canada speed. Most Festool dealers in Canada ship from Ontario or Quebec. We ship from Calgary, so Western Canada gets it faster than ordering from out east.
Festool tools and discs we stock
Festool-compatible sanding discs (Sia Siaspeed 1950)
Sizes: 5″ / 125 mm (fits ETS 125, ETS EC 125, RO 90 in 5″ mode) and 6″ / 150 mm (fits ETS 150, ETS EC 150, RO 150).
Grits stocked (100/box): 40 · 60 · 80 · 100 · 120 · 150 · 180 · 220 · 240 · 320 · 400 · 500 · 600 · 800 · 1000 · 1200 · 1500.
Hole pattern: 49-hole Festool standard (also fits Mirka multi-hole tools).
Festool tools and accessories
We stock a broad Festool range — random orbital and EC sanders (including the ETS 125 REQ-Plus), CLEANTEC CT dust extractors and Domino joinery tenons and cutters. Browse all Festool tools → If a part isn’t on our shelf, we can order it in from Festool Canada — call and we’ll confirm availability and lead time.
Lamello connectors and biscuit joiners
For Festool users who run a Lamello biscuit/connector workflow alongside their Festool sanding setup, we also stock the Lamello consumable line — Cabineo, P-System, Clamex connectors, and Zeta P2 cutters. Browse Lamello →
Festool tools in our catalog
The Festool tools side of our catalog has grown well past sanders. We now list more than 100 Festool part numbers, from the tools themselves to the blades, pads, filters and tenons that keep them running. Here is how it breaks down, with links to each product.
Sanders
Our Festool sanders include the ETS EC 150/3 EQ-Plus, a compact 6-inch random orbital sander with a 3 mm stroke for fine finishing, and the ETS 125 REQ-Plus, a lightweight 5-inch random orbital sander with a 2 mm stroke. For flat panels and corners we carry a compact rectangular orbital sander and a 250 W delta sander for tight spaces. Pair any of them with the Sia discs and sheets further down this page.
Dust extractors and CLEANTEC accessories
The CT 36 HEPA dust extractor is a portable 36 L unit with Bluetooth control and automatic tool start. To keep CT extractors working we stock self-cleaning filter bags for the CT MINI, CT MIDI and CT 15 (2019 models onward), the CT MIDI made until 2018, the CT 26 and the CT 48, plus the PTFE-coated main filter for CT 26, 36 and 48 AutoClean units. Add a cyclone pre-separator, a 3.5 m antistatic hose or a 5 m conical hose, the drilling dust nozzle, a vacuum clamp, or a reusable dust bag for the RTS 400, DTS 400 and ETS 125 sanders.
DOMINO joiners, tenons and cutters
We carry both DOMINO joiners: the DF 500 Q-Set for cabinet and furniture joints, and the DOMINO XL DF 700 EQ-Set for large frames, doors and beds. Every tenon is solid beech, and the carbide-tipped cutters come in each tenon thickness: 4, 5, 6, 8 and 10 mm for the DF 500, and 8, 12 and 14 mm for the DF 700. The table further down lists every tenon size and pack we have. Shop DOMINO cutters
Track saws, routers and guide rails
For cutting, we list the TSC 55 KEBI-F-Plus cordless track saw with its integrated kickback stop, the compact 1,010 W plunge router with fine depth adjustment and LED light, and the OF 2200 EB-F-Plus router with 2,200 W of power. Guide rails come in 42-inch (1080 mm), 55-inch and 75-inch (1900 mm) lengths, plus the FSK 420 cross-cutting rail and its tote bag. Rail accessories include the FSV rail connector, 120 mm and 300 mm screw clamps, the kickback and limit stop, the FS-PA parallel side fence and FS-PA-VL extension, a 5 m replacement splinterguard and a 10 m anti-slip strip.
Saw blades and jigsaw blades
Circular saw blades come in 160 mm (12-tooth rip, 28-tooth, 42-tooth fine-cut, and 48- and 52-tooth TCG for laminate and solid surface), 168 mm (28- and 42-tooth), 210 mm (36- and 52-tooth) and 260 mm (60-, 64- and 80-tooth), plus a 47 mm scoring blade for coated panels. For jigsaws we stock wood blades in 75, 105 and 145 mm lengths, a down-cut blade for splinter-free faces, a narrow blade for tight curves, bi-metal blades for steel and aluminium, and a carbide-grit blade for tile and cement board. Shop saw blades · Shop jigsaw blades
Sanding pads and interface pads
Replacement pads keep Festool tools sanding flat. We list 5-inch soft and hard pads, 6-inch MULTI-JETSTREAM 2 pads in soft, hard and ultra-soft, a delta pad for the DTS 400, a StickFix backing pad for the RTS 400, and foam interface pads for 5-inch and 6-inch sanders and the RTS 400 that let the abrasive follow curves. There is also an edge-sanding attachment for the ETS 125 REQ.
Festool Granat abrasives (specialized)
For specialized jobs we also list a small range of Festool Granat abrasives: 225 mm Granat discs with the 128-hole Multi-Jetstream pattern in P80, P120, P150, P180 and P220 (25 per pack), and Granat P80 delta sheets (7-hole StickFix, 10 per box) for the DTS 400 and DS 400 delta sanders. For everyday 5-inch and 6-inch sanding on Festool tools, most customers run the Sia discs further down this page.
Batteries, cords and edge banding supplies
For cordless Festool tools we carry the 18V 3.1 Ah battery with Bluetooth extractor activation and the ergonomic 18V 3.0 Ah battery for the cordless sanders, along with a Plug-It replacement power cord. Shops running the CONTURO KA 65 edge bander can order EVA glue pucks in white, natural and black, 48 to a pack.
DOMINO tenon quick reference
Every DOMINO tenon we stock, by size, with the joiner it fits and the pack sizes available.
| Tenon size | Joiner | Pack sizes |
|---|---|---|
| 4 × 20 mm | DF 500 | 450 |
| 5 × 30 mm | DF 500 | 300, 1800 |
| 6 × 40 mm | DF 500 | 1140 |
| 8 × 40 mm | DF 500 | 130, 780 |
| 8 × 50 mm | DF 500 / DF 700 | 100, 600 |
| 10 × 50 mm | DF 500 / DF 700 | 85, 510 |
| 8 × 80 mm | DF 700 | 190 |
| 8 × 100 mm | DF 700 | 150 |
| 10 × 80 mm | DF 700 | 150 |
| 10 × 100 mm | DF 700 | 120 |
| 12 × 100 mm | DF 700 | 100 |
| 12 × 140 mm | DF 700 | 90 |
| 14 × 75 mm | DF 700 | 104 |
| 14 × 100 mm | DF 700 | 80 |
| 14 × 140 mm | DF 700 | 70 |
| Tenon stock, 750 mm long | 8 and 10 mm: DF 500 / DF 700; 12 and 14 mm: DF 700 | 36 (8 mm), 28 (10 mm), 22 (12 mm), 18 (14 mm) |
Not sure which tenon to use? A common rule of thumb is a tenon about one third the thickness of the stock. Call us with your material thickness and we will help you pick the size.
Setting up Festool tools for dust-free sanding
A Festool sander does its best work as part of a system: the sander, the right pad, a disc with the matching hole pattern, and a CT extractor on the other end of the hose. Here is the setup we put together most often for shops buying Festool tools for the first time.
- Sander: an ETS EC 150/3 for general finishing on flat panels, or an ETS 125 REQ if you want something lighter for overhead and vertical work.
- Pad: the hard pad for flat surfaces and crisp edges, the soft pad for general work, and an interface pad when you are sanding curves or profiles.
- Abrasive: Sia Siaspeed in the hole pattern that matches the pad, in a ladder of four or five grits for your material.
- Extraction: a CT extractor such as the CT 36, a 3.5 m hose, and a spare pack of filter bags so a full bag never stops the job.
If you already own some of these pieces, tell us what you have and we will fill the gaps instead of selling you a full kit.
Choosing Festool guide rails and saw blades
Rail length. A 42-inch rail handles shorter crosscuts and shelving. A 55-inch rail covers a full crosscut across a 4-foot sheet of plywood or MDF. The 75-inch rail is for longer rips, and two rails joined with the FSV connector give you a straight cut along a full 8-foot sheet. The FSK 420 rail is the short cross-cutting rail for the HK series circular saws, with angle settings from −45° to +60°.
Tooth count. Fewer teeth cut faster and clear chips better, so the 12-tooth blades are for ripping solid wood. Mid counts (28 to 42 teeth) are good general-purpose blades for wood and sheet goods. High counts and TCG (triple-chip) grinds, like the 48- and 52-tooth 160 mm blades, give the cleanest edge on laminate, veneered panels and solid surface. Match the blade diameter and bore to your saw before ordering.
Splinterguards. A fresh splinterguard on the rail or saw is the cheapest way to get a tear-out-free edge again. We stock replacement guards for the FS rails, the TS 55 EQ and TS 75 EQ, the TS 55 R, TS 55 F, TSC 55 and TSC 55 K, and the PS 300 and PSB 300 jigsaws.
Hard, soft or ultra-soft: picking a sanding pad
The pad changes how the abrasive meets the work. A hard pad keeps the disc flat, so it is the choice for flat panels, veneer and crisp edges where you do not want to round anything over. A soft pad is the everyday all-rounder. An ultra-soft pad or an interface pad lets the disc wrap gently over curves, mouldings and turned parts. Most shops running Festool tools keep a hard and a soft pad for each sander and swap them as the job changes.
Festool saw blade quick reference
The circular saw blades we list for Festool tools, by diameter and tooth count. Check your saw’s blade size and bore before you order.
| Diameter | Teeth | Best for | Part |
|---|---|---|---|
| 160 mm | 12 | Rip cuts in solid wood | 205559 |
| 160 mm | 28 | General wood cutting | 205560 |
| 160 mm | 42 | Fine crosscuts in wood, veneer and MDF | 205561 |
| 160 mm | 48 TCG | Laminate and solid surface | 496309 |
| 160 mm | 52 TCG | Laminate and solid surface | 205562 |
| 168 mm | 28 | General wood cutting | 205771 |
| 168 mm | 42 | Fine crosscuts in wood, veneer and MDF | 205772 |
| 210 mm | 36 | Wood and soft plastics | 495380 |
| 210 mm | 52 | Splinter-free crosscuts in wood and veneer | 495381 |
| 260 mm | 60 | Wood and soft plastics | 495388 |
| 260 mm | 64 MATB | Laminate and solid surface | 495386 |
| 260 mm | 80 | Splinter-free crosscuts in wood and veneer | 495387 |
Festool sanders at a glance
| Sander | Pad | Good for |
|---|---|---|
| ETS EC 150/3 EQ-Plus | 6″ round, 3 mm stroke | Fine finishing on large flat panels, cabinets and furniture |
| ETS 125 REQ-Plus | 5″ round, 2 mm stroke | Lighter finishing work, vertical and overhead sanding |
| Rectangular orbital sander | Rectangular, 2 mm stroke | Flat surfaces, edges and inside corners |
| Delta sander | Delta (triangle), 250 W | Tight spaces, corners and detail work |
All four of these Festool tools connect to a CT dust extractor, and every one has a matching Sia disc or sheet in our catalog.
Grit guide for Festool tools
- Initial stock removal: RO 150 + Siaspeed 40–60 — reclaim, weathered wood, paint stripping
- Smoothing: RO 150 + Siaspeed 80–120 — after heavy removal, before fine sanding
- Pre-finish prep on hardwood: ETS EC 150 + Siaspeed 150–180 — furniture and cabinets before stain
- Final pre-stain / pre-paint: ETS EC 150 + Siaspeed 220 — maximum grit before finish on wood
- Between-coat (waterborne lacquer): ETS EC 150 + Siaspeed 320–400 — de-nibbing between coats
- Auto-body primer prep: ETS EC 150 + Siaspeed 320–600 — color-coat-ready primer surface
- Auto-body color sanding: ETS EC 150 + Siaspeed 1000–1500 — removing dust nibs in clearcoat before polishing
The general rule: never skip more than one grit step. Going 80 → 220 leaves scratches the next coat won’t fill; 80 → 120 → 180 → 220 is the safe progression.
Pricing & ordering
Single-box pricing is on each product page. For larger quantities, call or email for a quote.
Frequently asked questions
Where does IBEX source its Festool tools?
We stock Festool tools sourced through the Canadian Festool distribution network. For tools not in our regular inventory, we can typically order them from Festool Canada — call and we’ll confirm current lead time.
Which discs do you recommend for Festool sanders?
For everyday work on Festool tools, most of our customers run the Sia Siaspeed 1950 line, built to the Festool 49-hole pattern. For specialized jobs we also list Festool Granat 225 mm discs and delta sheets. Tell us what you are sanding and we will suggest a grit ladder.
Do these discs work on Mirka sanders too?
Yes. The 49-hole Festool pattern is also the Mirka DEROS and CEROS pattern — the same disc fits both.
Do you stock Festool dust extractors and filters in Calgary?
Yes — we carry the CLEANTEC CT extractors and replacement filters. Call with the part number for anything not on the shelf.
What about the Festool RO 90 (small triangular sander)?
Use 5″ / 125 mm Siaspeed 1950 in round mode. For the triangular delta head, you need triangular sheets — call us with the grit you need.
Do you stock Festool batteries and cords?
Yes. We carry the 18V 3.1 Ah and 18V 3.0 Ah batteries and the Plug-It replacement power cord that fits every Festool tool with a Plug-It connector.
Which filter bags fit my CT extractor?
It depends on the model and year. The CT MINI, CT MIDI and CT 15 made from 2019 onward use one bag, the CT MIDI made until 2018 uses another, and the CT 26 and CT 48 each have their own. Send us the model on the label and we will confirm the right bag.
Do DOMINO tenons fit both joiners?
The 8 × 50 mm and 10 × 50 mm tenons and the 8 mm and 10 mm tenon stock work with both the DF 500 and the DF 700. The longer and thicker sizes are for the DOMINO XL DF 700 only. The quick reference table above lists each size.
Can you order Festool tools you do not list?
Often, yes. Call us with the part number and we will check whether it can be ordered in and confirm availability and lead time.
Can I see Festool tools in Calgary before I buy?
Our Calgary warehouse is at 2835 23 St NE, Unit 208, and you can choose pickup at checkout. Stock levels change, so check the product page or call us at 403-250-3399 before you come by and we will confirm what is on the shelf. If you are comparing two Festool tools, tell us the work you do and we will give you a straight answer on which one fits.