VSM 129807 – VSM 1" x 1" x 1/4" Flap Wheel, 40 Grit Aluminum Oxide (Single)

Description

VSM 129807 Flap Wheel, 1 x 1 x 1/4 Inch, 40 Grit

The VSM 129807 is a 1 x 1 x 1/4 inch flap wheel with 40 grit aluminum oxide abrasive, sold individually. Layered abrasive flaps give a consistent, coarse cut for deburring, blending, cleaning and surface preparation.

Features and Specifications

• Size: 1 inch diameter, 1 inch face width
• Mount: 1/4 inch shank, for die grinders and power drills
• Grit: 40, a coarse cut for rust, scale and burr removal
• Abrasive: aluminum oxide
• Flaps: X-weight cloth backing
• Pack: single wheel

How It Works

As the flaps wear, fresh abrasive is exposed, so the wheel keeps cutting at a steady rate through its life. The flaps flex to follow edges, holes and curved surfaces, which makes a flap wheel a good fit for blending and deburring work that a rigid wheel would gouge.

Who Uses It

Machinists, fabricators and maintenance techs use the VSM 129807 on a die grinder or drill for precision deburring and finishing in tight or contoured spaces, on metals, plastics and wood.

Tips for Best Results

Run the wheel at or below the speed rating of the tool and the wheel, and let it reach speed before it touches the work. Use light pressure and keep the wheel moving to avoid flat spots and heat. Follow 40 grit with a finer grit when you need a smoother finish. Wear eye and face protection, and replace the wheel when the flaps wear down near the core. Check the shank or mount for bends before each use, since an out-of-true wheel vibrates and wears unevenly.

Related Products

• VSM abrasives at IBEX
• Flap discs and flap wheels
• VSM 129819 2 inch flap wheel, 40 grit
• VSM 127437 5 inch ceramic flap disc

Order the VSM 129807 from IBEX

IBEX stocks this item in Calgary and ships from Calgary. For larger quantities, call or email for a quote.