Edge Safety Glasses — ANSI Z87.1+ Eyewear for Industrial Shops

Edge safety glasses in Calgary · ANSI Z87.1+ rated · shipped across Canada

Edge Eyewear builds safety glasses to the ANSI Z87.1+ high-impact standard, and many models also carry CSA Z94.3 and MIL-PRF-32432 ballistic ratings — at prices built for industrial shop programs rather than boutique procurement. IBEX Enterprises stocks the Edge safety glasses most used on the shop floor in clear, smoke, amber, mirror, and anti-fog lenses, and can source polarized and IR-rated options on request. Add Edge eyewear to any abrasive or tool order to consolidate your PPE into one shipment.

Outfitting a crew? Request a PPE quote or call 403-250-3399.

Why shop PPE programs use Edge safety glasses

ANSI Z87.1+ high-impact rated. Edge’s industrial line meets the ANSI Z87.1+ high-impact rating that provincial OHS and CSA Z94.3 frameworks call for in industrial work environments. Several models also meet the MIL-PRF-32432 ballistic standard for higher-impact tasks like grinding, machining, and demolition — check the marking on the specific model.

Lens options for every shop environment. Edge offers a full lens range; we stock the most common tints and can source the rest:

• Clear — general shop, indoor work, dust environments
• Smoke / mirror — outdoor work and low-glare shop environments
• Amber / copper — low-light indoor work and variable outdoor light
• Vapor Shield anti-fog — body-heat and temperature-differential fog
• IR welding shades and polarized lenses — available to order

Crew-friendly pricing. Edge delivers ANSI Z87.1+ certification at a fraction of premium-brand pricing — a meaningful saving when you’re outfitting a whole crew at the start of a fiscal year.

Edge safety glasses models we stock

All models below are ANSI Z87.1+ high-impact rated; CSA Z94.3 and ballistic ratings vary by model and lens — ask us to confirm for a specific SKU.

• Edge Viso — wraparound shop standard for general fabrication, assembly, and woodworking. In stock: clear (CV111) and smoke (CV116).
• Edge Zorge G2 — lightweight half-frame for all-day wear. In stock: clear (DZ111-G2), amber (DZ114-G2), and silver mirror (DZ117-G2).
• Edge Khor G2 — full wraparound with soft-grip temples. In stock: amber-tinted “driving” lens (SDK115-G2).
• Edge Kazbek — slimmer profile that fits under welding hoods and respirator straps. In stock: silver mirror (SK117) and aqua precision red mirror (SKAP119).
• Edge Delano G2 — modern full-frame fit. In stock: smoke (SD116-G2).
• Edge Kabru — built for dust and fog with a Vapor Shield anti-fog lens. In stock: Vapor Shield clear (KB131VS).

Every Edge safety glasses model we list

We now list 15 Edge safety glasses part numbers. This table shows the lens, frame features and ratings for each, taken from the product listings. Ratings are marked on the frame and lens, so always check the marking on the pair in your hand.

Choosing a lens tint for Edge safety glasses

Clear lets in the most light, so it is the default for indoor shop work, machining, woodworking and night shifts. Our clear options are the CV111, DZ111-G2, XV411 and the anti-fog KB131VS.

Smoke cuts overall brightness and glare for outdoor work and brightly lit areas. Choose the CV116, SD116-G2 or XB138, or the anti-fog TV126VS and TV166VS if fogging is a problem.

Amber boosts contrast and depth in low light, flat light and snow. The DZ114-G2 and the SDK115-G2 driving lens are our amber options, popular with crews who move between yard and shop.

Mirror lenses reflect light away from the eye for strong sun and glare. We list silver mirror (DZ117-G2 and SK117) and red mirror (SKAP119 and SLAP119). Mirror and smoke lenses darken your view, so save them for bright conditions rather than dim indoor work.

Anti-fog lenses, sold by Edge as Vapor Shield, resist fogging from body heat, masks and temperature changes. Look for the VS at the end of the part number.

Fit and comfort features

Safety glasses only protect when people keep them on, and comfort is the main reason they come off. A few features to look for in Edge safety glasses:

• Wraparound frames (such as the Viso CV111 and CV116 and the XV411) give side coverage without separate side shields.
• Brow guards, like the one on the KB131VS, help keep debris from dropping in over the top of the lens.
• TPR temple tips and arms on the XB138, XV411 and TV models grip without pinching, which helps on long shifts and when sweating.
• Slim profiles like the Kazbek fit better under welding hoods and with respirator straps.
• Loupes compatibility on the SLAP119 suits workers who use magnifying loupes.

What the safety ratings mean

ANSI Z87.1+ is the American standard for occupational eye protection. The plus sign shows the eyewear passed the high-impact tests, and the marking appears on the frame and lens.

CSA Z94.3 is the Canadian standard for eye and face protectors. The KB131VS lists CSA Z94.3 and the XV411 is listed as CSA compliant.

Military ballistic ratings (listed on several models as military ballistic or MCEPS) mean the eyewear has passed ballistic impact testing beyond the standard industrial test. Several of our Edge safety glasses list a military rating.

Your employer’s safety program sets which standards your crew needs. If you have a written spec, send it to us and we will match Edge safety glasses to it.

Edge safety glasses for grinding and abrasive work

Most of what we sell throws something: grit from a sanding disc, sparks from a fibre disc, wire from a brush, chips from a saw. That makes eye protection the one item every abrasive order should include.

Grinding. Angle grinders and die grinders throw sparks and fragments at high speed. Wear Z87.1+ high-impact safety glasses, and add a face shield over them for heavy grinding, as most grinder manufacturers recommend. A wraparound frame or brow guard helps stop debris coming in from the side or top.

Sanding. Dust is the main problem, and on long jobs, fog. A clear wraparound pair or an anti-fog Vapor Shield model keeps vision sharp, especially when you are also wearing a dust mask.

Outdoor and yard work. Smoke, amber or mirror Edge safety glasses cut glare from sun and snow while keeping the same impact protection.

See our VSM, Sia and Dynabrade pages for the abrasives and tools, and add a few pairs of Edge safety glasses to the same order.

Edge safety glasses in welding shops

Standard safety glasses are not welding filters. Under a welding hood they protect your eyes from grinding debris and chipping slag when the hood is up, but they do not replace the hood’s filter lens. The slim Kazbek frame fits under most hoods. Edge also makes IR welding shade lenses, which we can order for you.

Outfitting a crew with Edge safety glasses

Buying for a whole crew is different from buying one pair. A few things make a PPE program work better:

• Offer a choice. People wear the glasses they like. Stocking two or three frame styles in clear, plus a tinted option for outdoor work, gets better compliance than one model for everyone.
• Keep spares on hand. Scratched lenses get worn anyway if there is no replacement in the cabinet. A small reserve of each model saves that.
• Match the lens to the task. Clear for indoor and night work, anti-fog where masks are worn, tinted for outdoor crews.
• Combine your orders. Add Edge safety glasses to your abrasives and tools order and it all arrives in one shipment.

Tell us how many people you are outfitting and the kind of work they do, and we will put together a quote with the right mix of Edge safety glasses.

Caring for safety glasses

Rinse before you wipe. Shop dust contains abrasive grit. Wiping a dry, dusty lens drags that grit across the surface and scratches it. Rinse with water or lens cleaner first, then dry with a soft cloth.

Use the right cloth. A microfibre cloth is gentler than a shop rag or paper towel.

Store them properly. Keep glasses in a case or pouch, not loose in a toolbox or face-down on a bench.

Replace them when they are damaged. Pitted, scratched or cracked lenses, or a frame that no longer fits, reduce protection and vision. Safety glasses are inexpensive compared with an eye injury, so replace them as soon as they show wear.

Edge safety glasses by job

• Machinists and CNC operators: clear wraparound frames such as the CV111 or XV411 for side coverage against chips and coolant splash.
• Woodworkers and cabinet shops: clear lenses for accurate colour and grain, with an anti-fog Vapor Shield model if you wear a dust mask.
• Auto body and paint prep: clear anti-fog lenses that work with respirators, like the KB131VS.
• Fabricators and welders: the slim Kazbek under the hood, Z87.1+ glasses plus a face shield for grinding, and IR shades to order.
• Outdoor and yard crews: smoke, amber or mirror Edge safety glasses for sun, snow and glare.
• Warehouse and shipping: light, comfortable frames like the Zorge G2 that people will keep on all shift.
• Labs, clinics and detail work: the loupes-compatible SLAP119.

How safety glasses should fit

A good fit sits close to the face without touching the eyelashes, with no large gaps at the sides or top. The temples should rest on the ears without pressing on the side of the head, and the glasses should stay in place when you look down at the bench or bend over. If a pair slides down the nose or leaves marks after an hour, try a different frame. Comfort is what keeps safety glasses on.

An eye protection checklist for shop owners

Use this quick checklist when you set up or review the eye protection in your shop:

1. Know the hazards. Walk the shop and note where chips, sparks, dust, splash and glare happen. Grinding stations, saws, lathes, sanding areas and the welding bay usually top the list.
2. Set the standard. Decide which rating your shop requires, such as ANSI Z87.1+ high-impact and, where needed, CSA Z94.3, and buy only eyewear that carries those markings.
3. Pick two or three models. Choose frames that fit different face shapes, and add a tinted pair for anyone who works outside.
4. Add face shields where needed. Heavy grinding and cutting call for a face shield worn over safety glasses.
5. Stock spares and cleaning supplies. Keep extra Edge safety glasses, lens cleaner and cloths where people can reach them.
6. Replace on schedule. Check glasses regularly and swap out any pair with scratched, pitted or cracked lenses.

Choosing the right Edge for your shop

• General fab / assembly / woodwork: Viso, clear or Zorge G2, clear
• Outdoor / bright light: Zorge G2, silver mirror or Khor G2, amber driving lens
• Low-light / indoor grinding visibility: Zorge G2, amber
• Grinding / dust / fog: Kabru, Vapor Shield clear
• Under a welding hood or respirator: Kazbek (IR welding lenses available to order)

Need an over-the-glasses (OTG) fit or IR welding shades? We can order those from Edge — send a parts list to info@ibexent.com.

Common buyer questions

What does the “+” in ANSI Z87.1+ mean?

The “+” means the lens has passed a high-velocity impact test (250 ft/s). All Edge models we stock are Z87.1+ high-impact rated — the version industrial shops should spec.

Are Edge glasses CSA-compliant for Canadian shops?

Many Edge models carry CSA Z94.3 in addition to ANSI Z87.1+. Ratings are marked on the frame; tell us the model you need and we’ll confirm.

Can I wear Edge safety glasses over prescription glasses?

Standard models are designed to be worn on their own. For people who wear prescription glasses, Edge makes over-the-glasses (OTG) styles, which we can order. Send us the details and we will confirm what is available.

Are mirror or smoke lenses safe to wear indoors?

They give the same impact protection, but they darken your view. For indoor work and anywhere lighting is dim, a clear or amber lens is the better choice.

What is Vapor Shield?

Vapor Shield is Edge’s anti-fog lens coating. The models with VS in the part number, such as the KB131VS, TV126VS and TV166VS, use it.

Do you carry Edge safety glasses for construction crews?

Yes. All the models on this page suit general construction and shop work, and the SLAP119 is listed for construction and medical professionals who use loupes.

Why do my safety glasses fog up?

Fog forms when warm, moist air from your face or a mask meets a cooler lens. Anti-fog lenses help a lot, and so does a frame that leaves a little airflow around the lens. If you wear a mask or respirator, choose an anti-fog Vapor Shield model.

Are lower-priced safety glasses less protective?

Any eyewear marked Z87.1+ has passed the same high-impact tests. Price differences usually come from comfort features, coatings, lens options and style. Edge safety glasses focus on giving rated protection at a price that works for whole crews.

Do you supply schools, trades programs and public sector buyers?

Yes. We supply shops, trades programs and public sector buyers. Send us your quantity and spec and we will prepare a quote.

Can I pick up Edge safety glasses in Calgary?

Yes. Choose pickup at checkout and collect your order from our warehouse at 2835 23 St NE, Unit 208, or call us at 403-250-3399 to check stock first.

How many pairs of Edge safety glasses should I keep on hand?

Plan on one pair per worker plus spares for visitors, new hires and replacements. Shops doing a lot of grinding and sanding go through lenses faster than assembly or shipping areas, so keep more spares there. Tell us your crew size and the work you do, and we will suggest a starting quantity of each model.

Request a PPE quote

Outfitting a crew? We’ll put together a quote and ship from Calgary. Contact us or call 403-250-3399.