Festool 489571 – FSZ 300 Fastening Clamp

Description

Festool 489571 FSZ 300 Fastening Clamp, 2 Pieces

The Festool 489571 is the FSZ 300 fastening clamp, sold as 2 pieces. It is a solid steel screw clamp shaped to fit the clamp groove on Festool guide rails, the MFT multifunction table and Festool machines, with a 300 mm (11-13/16 inch) clamping width for thick or stacked workpieces.

Features and Specifications

• Clamping width: 300 mm (11-13/16 inch)
• Body: solid steel for a firm hold
• Handle: ergonomically shaped wooden handle
• Pad: soft protective cap for non-slip, gentle clamping
• Fits: FS/2, FS/2-KP and FSK guide rails, and the MFT
• Pack: 2 pieces

Where It Fits

Slide the clamp head into the groove under the guide rail or cross-cutting rail and tighten it against the workpiece, so the rail cannot move during the cut. On an MFT/3 or in a mobile workshop, the same clamps hold workpieces down for routing, drilling and sanding. They also fasten sections on semi-stationary saws such as the CS 50/70 and KS/KSC 60.

Who Uses It

Cabinet makers, finish carpenters and installers use the Festool 489571 for angled rail cuts, narrow parts and any cut where the rail grip strips alone are not enough. Its deeper reach handles thick stock and stacked parts that a shorter clamp cannot span.

Use and Care

Tighten only as much as needed to stop movement; overtightening can mark soft wood and flex thin panels. Keep the threads free of dust and glue, and check the protective caps from time to time. Replace a worn cap so the clamp does not mark finished surfaces, and store the clamps where they will not be dropped or bent.

Related Products

• Festool tools and accessories at IBEX
• Guide rails and accessories
• Festool 489570 FSZ 120 fastening clamp, 2 pieces
• Festool 769941 FSK 250 cross-cutting guide rail

Order the Festool 489571 from IBEX

IBEX stocks this item in Calgary and ships from Calgary. For larger quantities, call or email for a quote.