Dynabrade 54325 – 5" Hook-Face Disc Pad, Non-Vacuum, Medium Density
$42.70
Best for: Replacement disc pad for 5″ random orbital sanders with a 5/16″-24 spindle thread, such as Dynabrade Dynorbital models.
Why this one: Medium density is the all-round choice for flat work; pick the soft-density 56195 pad for contours or a PSA pad for stick-on discs.
5″ | Hook-face | Medium density | Non-vacuum | 5/16″-24 thread
9 in stock (can be backordered)
Description
Dynabrade 54325 5 Inch Hook-Face Disc Pad, Medium Density
The Dynabrade 54325 is a 5 inch (127 mm) non-vacuum disc pad with a hook-face short nap surface for hook and loop abrasive discs. It is made from medium-density urethane and fits random orbital sanders with a 5/16-24 spindle. The medium density gives a balance of flexibility and firmness for smooth, swirl-free finishes on flat and lightly contoured work.
Features and Specifications
- Part number: Dynabrade 54325
- Diameter: 5 inch (127 mm)
- Type: non-vacuum
- Face: hook-face short nap
- Pad material: medium-density urethane
- Thickness: 3/8 inch (10 mm)
- Mount: 5/16-24 male thread
- Hub: single-piece hub design to reduce vibration
Fitting the Pad
Thread the pad onto a sander with a 5/16-24 spindle and snug it by hand. Check that it runs true before you start. Use it with 5 inch hook and loop discs. Press each disc on centered and flat so the edge does not overhang, and peel discs off by the edge to avoid pulling the hooks. Always confirm the pad’s speed rating is at or above the sander’s free speed.
Who Uses It
Replacement disc pads are a routine part of keeping random orbital sanders running in auto body shops, cabinet and furniture shops, and metal and composite finishing. A fresh pad restores flat contact with the disc, which gives a more even scratch pattern and better finish.
Care and Replacement
Do not run the sander without a disc on the pad, since the face can be damaged. Keep pressure light so heat does not build up in the urethane. Replace the pad when the hooks wear and discs start to slip or fly off, or when the edge is torn or the face is no longer flat. Store spare pads flat and away from heat.
Related Products
- Dynabrade products at IBEX
- Dynabrade 56107 6 inch non-vacuum PSA disc pad
- Dynabrade 56106 5 inch non-vacuum PSA disc pad
- Dynabrade 54327 6 inch non-vacuum hook-face disc pad
- All sanding and interface pads
Order the Dynabrade 54325 from IBEX
IBEX stocks this item in Calgary and ships from Calgary. For larger quantities, call or email for a quote.
Additional information
| Weight | 0.30 lbs |
|---|---|
| Dimensions | 6.00 × 6.00 × 1.00 in |
| Diameter | 5" |
| Thread Size | 5/16"-24 |
| Part Number | 54325 |
| Condition | New |
You may also like…
-

Dynabrade 56106 – 5" PSA Disc Pad, Non-Vacuum
PSA face for stick-on discs | non-vacuum0 out of 5$41.57 Add to cart -

Dynabrade 56195 – 5" Hook-Face Disc Pad, Non-Vacuum, Soft Density
Hook face Hook-face, soft density | curves and contours | non-vacuum0 out of 5$48.31 Add to cart -

Dynabrade 56104 – 5" PSA Vacuum Disc Pad, Vinyl Face
PSA vinyl face | vacuum holes for dust extraction0 out of 5$41.57 Add to cart
Related products
-

Festool 492280 – ST-STF 125/8-M4-J W-HT Soft Sanding Pad, 5", M4 Thread
5" soft pad, M4 | ETS 125, ES 125, ETSC 1250 out of 5$70.00 Add to cart -

Festool 492271 – IP-STF-D120/8-J Interface Pad, 120mm
5" soft interface pad | curves and profiles0 out of 5$23.00 Add to cart -

Mirka 9934 – 3" x 4" Grip Interface Pad, 33-Hole, 1/4" (7 mm) Thick (5/Pack)
Interface 3x4 Soft 7 mm interface | 33 holes | contours0 out of 5$65.48$13.10 per pad · 5 in the packAdd to cart -

Festool 205316 – Edge Sanding Attachment for ETS/ETSC 125
Accessory Edge sanding guide | ETS 125 REQ, ETSC 1250 out of 5$199.00 Add to cart








Reviews
There are no reviews yet.