Festool 769941 FSK 250 Cross-Cutting Guide Rail

Description

Festool 769941 FSK 250 Cross-Cutting Guide Rail

The Festool 769941 is the FSK 250 cross-cutting guide rail. It turns a compatible Festool portable circular saw or plunge-cut saw into a portable compound mitre saw for quick, straight and angled cross cuts on site.

Features and Specifications

• Cutting length: 250 mm (9-7/8 inch)
• Angle range: -45 to +60 degrees, with locking positions for common angles
• Retraction: returns the saw to its starting position after each cut
• Splinter control: rubber lip at the scribe mark reduces splintering
• Surface protection: adhesive strip protects the workpiece
• Weight: 1 kg (about 2.2 lbs)
• Included: one FSZ 120 fastening clamp

Compatible Saws

The FSK 250 works with the HK 55, HKC 55, HKC 55 K, HK 85, TS 60 K and TSV 60 K. The saw attaches with a quick-release connection, and FSK rails can be connected for repeatable angle cuts.

Who Uses It

Framers, roofers, deck builders and renovators use the Festool 769941 for repeat cross cuts and mitres on lumber, insulation boards and board materials, right where the work is.

Tips

Set the angle against the locking positions, clamp the rail with the FSZ clamp, and let the saw return fully before the next cut. Replace the rubber lip and adhesive strip when worn to keep cuts clean.

Getting Accurate Cuts

Check the angle setting with a square or a test cut before cutting a batch of parts. Hold the saw firmly, let the blade reach full speed before you push, and feed at a steady rate. Keep the slideway free of sawdust so the saw runs smoothly and returns to its start position every time. Store the rail in its bag between jobs to protect the rubber lip.

Related Products

• Festool tools and accessories at IBEX
• Guide rails and accessories
• Festool 200160 FSK420-BAG rail bag
• Festool 489570 FSZ 120 fastening clamp

Order the Festool 769941 from IBEX

IBEX stocks this item in Calgary and ships from Calgary. For larger quantities, call or email for a quote.