Festool 499011 – SP-TS 55 R/5 Splinterguard, 5-Pack

Description

Festool 499011 SP-TS 55 R/5 Splinter Guard, 5 Pack

The Festool 499011 is the SP-TS 55 R/5 splinter guard, sold as a pack of 5. It replaces the viewing window on compatible Festool plunge-cut saws and gives low-splinter cuts to the right of the blade, the side that faces the offcut when you work along a guide rail.

Features and Specifications

• Pack: 5 pieces
• Fits: Festool TS 55 R, TS 55 F, TSC 55, TSC 55 K and TSC 55 KS plunge-cut saws
• Height-adjustable: use it with or without a guide rail
• Blade marking: shows the front edge of the blade at maximum cutting depth
• Blades: works with all saw blades

How It Works

Fit the guard in place of the viewing window and run the saw. The spinning blade cuts into the guard, so it fits that blade exactly and supports the fibres right at the cut. For the older TS 55 EQ and TS 75 EQ saws, use the SP-TS 55/5 (491473) instead.

Typical Uses

Main uses are door cut-outs and panel cuts, where both sides of the cut need to stay clean. Cabinet shops and finish carpenters fit the Festool 499011 when cutting veneered panels, melamine and laminate.

Tips

Replace the guard when you switch to a blade with a different kerf width, so the opening matches the new blade. Keep a spare from the pack in the saw case, and fit a fresh one as soon as the edge starts to break down. A guard with a chipped edge no longer supports the fibres and gives little benefit.

Check Your Saw Model

Festool makes splinter guards for specific saw generations, so confirm the model on the saw label before you order. If you run both older and newer saws, keep a pack of each guard with the matching saw.

Related Products

• Festool tools and accessories at IBEX
• Guide rails and accessories
• Festool 491473 SP-TS 55/5 splinter guard
• Festool 490120 SP-PS/PSB 300/5 jigsaw splinter guard

Order the Festool 499011 from IBEX

IBEX stocks this item in Calgary and ships from Calgary. For larger quantities, call or email for a quote.