Dynabrade X61V – Dynorbital® Extreme Sander, 6", 3/16" Orbit, Vacuum, Hook-Face

Description

Dynabrade X61V Dynorbital Extreme 6 Inch Central Vacuum Sander

The Dynabrade X61V is a 6 inch Dynorbital Extreme random orbital air sander built for central vacuum systems, with a 3/16 inch orbit, a 0.3 HP motor and a rated speed of 12,000 RPM. At 1.9 lb it offers a strong power-to-weight ratio, and the hook-face pad takes 6 inch hook and loop discs.

Features and Specifications

• Pad size: 6 inch (152 mm), hook-face
• Orbit: 3/16 inch (4.8 mm) random orbit
• Motor: 0.3 HP air motor, 12,000 RPM
• Weight: 1.9 lb
• Dust: central vacuum model
• Ergonomics: ergonomic body with integrated wrist support

Where It Fits

The 3/16 inch orbit balances faster stock removal with a good finish, so the X61V handles leveling, primer sanding and general prep. Connect it to your shop’s central vacuum system to pull dust through the pad, and use hook and loop discs with a hole pattern that matches the pad so the extraction works.

Who Uses It

Woodworking, metalworking and composite finishing shops use the Dynabrade X61V where central extraction is already in place and operators sand for long periods.

Care and Air Supply Tips

Run the sander on clean, dry air and follow Dynabrade’s instructions for air pressure and lubrication. Drain the compressor tank and line filters regularly, since water and dirt in the air supply shorten the life of any air tool. Start the sander on the work, keep the pad flat and use light pressure so the random orbit can do its job. Check the pad face for wear, and replace a worn pad before it starts to tear abrasive discs or leave uneven scratches.

Related Products

• Dynabrade products at IBEX
• Dynabrade X62V Dynorbital Extreme 6 inch vacuum sander
• Dynabrade X62H Dynorbital Extreme 6 inch sander
• All Sanders

Order the Dynabrade X61V from IBEX

IBEX stocks this item in Calgary and ships from Calgary. For larger quantities, call or email for a quote.