Unit 208 – 2835 23 St NE, Calgary AB · info@ibexent.com403-250-3399 · Ships from Calgary all across Canada

Sanders – Random Orbital, Air & Electric

Electric and air sanders: Festool ETS EC 150, ETS 125, RTS 400 and DTS 400, and Dynabrade Dynorbital Extreme, Dynorbital-Spirit and Dynabug II air sanders. See sanding and interface pads for replacement pads.
Looking for sanders in Calgary? Pick up at our NE Calgary store or order online and we ship across Canada. Shop by type: random orbital sanders, air (pneumatic) sanders, electric sanders and orbital and detail sanders.

    Showing all 10 resultsSorted by popularity

    How to choose a sander

    Most professional shops end up with two or three sanders, because each type does one job best.

    • Random orbital sanders spin and orbit at the same time, so they remove material fast without leaving swirl marks. They are the everyday sander for wood, paint prep and autobody work. Pick a 5-inch or 6-inch pad, and a bigger orbit (3/16-inch) for faster removal or a smaller orbit (3/32-inch) for a finer finish.
    • Orbital (finishing) sanders have a rectangular pad that gets into corners and keeps flat panels flat, like the Festool RTS 400 and the Dynabrade Dynabug II.
    • Delta (detail) sanders have a triangle pad for inside corners, edges and tight spots, like the Festool DTS 400.
    • Air vs electric: Dynabrade air sanders are light, compact and built for all-day production work on shop compressed air. Festool electric sanders plug in anywhere and connect to a CLEANTEC dust extractor for near dust-free sanding.

    Discs, pads and dust extraction

    Match the abrasive to your pad size and hole pattern: 5" hook and loop discs, 6" hook and loop discs, sander sheets and delta sheets. Replacement pads are under sanding and interface pads, and extractors under dust extractors. See our Sanding Disc Hole Patterns guide if you are not sure which discs fit.

    Frequently asked questions

    Where can I buy a sander in Calgary?

    At IBEX Enterprises, Unit 208, 2835 23 St NE, Calgary. Local pickup is Monday to Friday, 8:30 am to 4:00 pm, and we also ship across Canada from Calgary.

    What is the difference between a random orbital sander and an orbital sander?

    A random orbital sander has a round pad that spins and orbits at the same time, so it removes material faster and leaves no swirl pattern. An orbital (finishing) sander has a square or rectangular pad that only orbits; it is slower but reaches into corners and keeps flat surfaces flat.

    Should I buy an air sander or an electric sander?

    Air sanders such as the Dynabrade Dynorbital are lighter and run cool for long production shifts, but you need a compressor that can keep up. Electric sanders such as the Festool ETS EC 150 plug into a regular outlet and pair with a dust extractor. Many autobody and production shops run air; many cabinet and finishing shops run electric.

    What size sander should I get, 5 inch or 6 inch?

    A 6-inch sander covers large panels faster. A 5-inch sander is lighter and easier to control on smaller parts and edges. Buy discs to match the pad size and hole pattern of the sander you choose.